Cannot update Intellingent Provisioning

[RPAdmin]

Hi all,

Well i have a problem updating (1.70) Intelligent Provisioning on my HP Proliant DL380p Gen8. Also when i press F10 Intelligent Provisioning is not starting and go straight to boot my OS. Intellingent Provisioning is enabled in my bios.

When i go to update Intelligent Provisioning it is stuck on 80%. I created a USB stick with the HP tools, load a ISO in ILO tried other versions (1.63) but that also is being stuck on 80%

Somebody can help me with this issue?

[Torsten.]

Check the ILO diagnostics page if there is an issue.

[RPAdmin]

If i click on diagnostics i see one warning:

Embedded Flash/SD-Card: controller firmware revision 2.09.00 could not partition embedded media device.

I have not installed a sd card in the server. Could that be the problem for my intelligent provisioning update?

All other status are green.

[Torsten.]

this indicates the corrupted NAND issue. intelligent provisioning cannot be stored on this bad nand flash. consider to force a NAND format.

[Suman_1978]

Hi,

Here is an advisory with troubleshooting steps.

Thank You!
I am a HPE employee
_________________________________________
Was the post useful? Click on the white KUDOS! Thumb below.  Kudos is a way of saying thank you to a post.
// Useful Links for ProLiant Servers / Community FAQ / Rules of Participation / Servers Blog //