1833056 Members
2799 Online
110049 Solutions
New Discussion

CPU ERROR

 
ahmadrezzek
Member

CPU ERROR

i have Ml310e gen8 v2 and after update system rom to latest when start server get error unsupported processor detected system health please i need rom can i upload via ilo that fix the error notice before update system rom its NORMALLY WORK
after update server system rom when start its stoop on 10% and see error unsupported processor detected system halted
3 REPLIES 3
Suman_1978
HPE Pro

Re: CPU ERROR

Hi,

The error is straight forward, if you have installed any unsupported processor, please check.
Refer to the server QuickSpecs for supported processors.

Also check this guide for help.

Thank You!
I work with HPE but opinions expressed here are mine.
HPE Tech Tips videos on How To and Troubleshooting topics



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
BPSingh
HPE Pro

Re: CPU ERROR

Greetings!

As mentioned earlier by my colleague, kindly refer to the server quick specs to identify the processor model.

Additionally, could you provide information on the BIOS version to which you have performed the upgrade?



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
PDP-Fan
Valued Contributor

Betreff: CPU ERROR

To access the redundant ROM manually:
1. Remove power to the server.
2. Set the system maintenance switch positions 1, 5, and 6 to ON.
3. Power up the server.
4. After the server emits two beeps, power down the server.
5. Reset the system maintenance switch positions 1, 5, and 6 to OFF

This is the procedure to switch the BIOS ROM back to the old version. If your system was running before the update, it should run when you go back to the old version.
Your problem could be caused by a CPU type that does not belong into this server. It might have been working with the old firmware but the new firmware refuses it.

 

***********************************************
"If it seems illogical... you just don't have enough information"