DL380 Gen10+ HDD expansion cage?

[bogeygolfer1]

On a P05172-B21 DL380 Gen10 Plus with one cage filled with 8 SFF drives, what cage kit (and other hardware?) would be required to expand the server to allow for installation of more drives?

[Suman_1978]

Hi,

P05172-B21 being a HPE ProLiant DL380 Gen10 Plus 8SFF NC CTO Server with Embedded SW RAID with 14 SATA ports (12-ports accessible).

You may need to refer to QuickSpecs to see if additional controller is required.
Also refer to Cabling diagrams.

Thank You!
I work with HPE but opinions expressed here are mine.

[bogeygolfer1]

I'm trying to find out the SKU of the cage kit and any other requirements to expand a DL380 Gen10+ server

[Sham82]

Hello @ bogeygolfer1,

please refer to Page - 29 and 39 onwards
https://www.hpe.com/psnow/doc/a50002553enw

Regards
HPE

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[bogeygolfer1]

@Sham82 

Thanks, I've been through that but I wasn't able to confidently determine which is the correct part number. I was hoping someone could provide that