Enable Numa on DL380p Gen8 server

[와일드키드]

Hello,

I have old windows server HP DL380e G8. 

i tried to check numa via Coreinfo64.exe. and the results are as below.

As s result, i thought that the numa was disabled in my Server. is it right? 

So, how to enable numa in the system? 

C:\>coreinfo64.exe

~~~

~~~

Processor signature: 000306E4

Logical to Physical Processor Map:
**---------------------------------------------- Physical Processor 0 (Hyperthreaded)
--**-------------------------------------------- Physical Processor 1 (Hyperthreaded)
----**------------------------------------------ Physical Processor 2 (Hyperthreaded)
------**---------------------------------------- Physical Processor 3 (Hyperthreaded)
--------**-------------------------------------- Physical Processor 4 (Hyperthreaded)
----------**------------------------------------ Physical Processor 5 (Hyperthreaded)
------------**---------------------------------- Physical Processor 6 (Hyperthreaded)
--------------**-------------------------------- Physical Processor 7 (Hyperthreaded)
----------------**------------------------------ Physical Processor 8 (Hyperthreaded)
------------------**---------------------------- Physical Processor 9 (Hyperthreaded)
--------------------**-------------------------- Physical Processor 10 (Hyperthreaded)
----------------------**------------------------ Physical Processor 11 (Hyperthreaded)
------------------------**---------------------- Physical Processor 12 (Hyperthreaded)
--------------------------**-------------------- Physical Processor 13 (Hyperthreaded)
----------------------------**------------------ Physical Processor 14 (Hyperthreaded)
------------------------------**---------------- Physical Processor 15 (Hyperthreaded)
--------------------------------**-------------- Physical Processor 16 (Hyperthreaded)
----------------------------------**------------ Physical Processor 17 (Hyperthreaded)
------------------------------------**---------- Physical Processor 18 (Hyperthreaded)
--------------------------------------**-------- Physical Processor 19 (Hyperthreaded)
----------------------------------------**------ Physical Processor 20 (Hyperthreaded)
------------------------------------------**---- Physical Processor 21 (Hyperthreaded)
--------------------------------------------**-- Physical Processor 22 (Hyperthreaded)
----------------------------------------------** Physical Processor 23 (Hyperthreaded)

Logical Processor to Socket Map:
************************------------------------ Socket 0
------------------------************************ Socket 1

Logical Processor to NUMA Node Map:
************************************************ NUMA Node 0

No NUMA nodes.

Thank you.

[Suman_1978]

Hi,

Please refer to the RBSU Guide on page# 139
Also this document.

Thank You!
I work with HPE but opinions expressed here are mine.

[Tam92]

Hello,

Please let me know if you got the required information which you were looking for?

Please refer to the RBSU Guide on page# 139
Also this document.

Thanks,
TAM

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[와일드키드]

@Tam92 Hello,

Sorry for the delay.

Today, I checked what you guided me on my server (RBSU - Advanced Options).

After that  i check again with coreinfo64.exe. however i don't find configuration for numa nodes.

Can you help me?

Thank you.

[와일드키드]

Today, I checked what you guided me on my server (RBSU - Advanced Options).
After that i check again with coreinfo64.exe. however i don't find configuration for numa nodes.

Can you help me?