Help Me to solve Problem of installing windows Server 2012 R2 in HP Server Proliant DL380p G8

[exddruida · Accepted solution]

Hi nahed,

please check following action plan:

-> update/ re-flash the last IP SW - Ver.: 1.70(9 Oct 2017)
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_67851618d0f1444993f262f0f6

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.

Installation:

To re-install Intelligent Provisioning, burn this ISO to a DVD and boot your Gen8 server to it. 
Follow the onscreen instructions to install onto your system. 
Once installed, reboot your server and press the F10 screen at server POST to boot into Intelligent Provisioning.

-> try again to install the OS using the IP

*if still don`t work
-> please try to install the OS manually

Manual install the OS from a custom OS CD/DVD/ bootable USB. After selecting this option, insert the provided
CD/DVD so that the server can reboot from the OS CD/DVD....

all the steps you will find here / Page 21

https://support.hpe.com/hpsc/doc/public/display?docId=c03182305

**you may be requared to manually inject the device driver during the OS installation**

- use this one:
https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=5194969&swItemId=MTX_356a2e1f7acb4b32bf71b87bbb&swEnvOid=4184

[nahed]

thank's to all for reply and support the problem is solved by manually inject the device driver during the OS installation in @exddruida reply.

"**you may be requared to manually inject the device driver during the OS installation**

- use this one:
https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=5194969&swItemId=MTX_356a2e1f7acb4b32bf71b87bbb&swEnvOid=4184

I think the Problem happen because I have Fibre card installed and connected to san storage.

Thank's for all for Help me to solve this issue.