HP Proliant ML30 ML150 Gen9 RAID 1

[Gabriel_D1aS]

Caros, Bom dia, Boa Tarde e Boa noite.
Estou com dois servidores ambos Gen9 sendo o ML150 e o ML30, e gostaria de realizar um upgrade nos HD's, recentemente adquiri 4  SSD enterprise e irei instalar 2 em cada servidor, até aí tudo bem consegui clonar o sistema do HD antigo para o SSD, enfim.
Gostaria de saber como posso estar configurando um RAID 1 nesses SSD's sem perder os dados armazenados?
Grato.

Dear all, Good morning, Good afternoon, and Good evening.

I have two Gen9 servers, the ML150 and the ML30, and I would like to upgrade the hard drives. Recently, I acquired 4 enterprise SSDs and I plan to install 2 in each server. So far, everything is fine; I managed to clone the system from the old hard drive to the SSD.

I would like to know how I can configure a RAID 1 on these SSDs without losing the data already stored on them?

Thank you.

[support_s]

System recommended content:

1. HPE ProLiant ML150 Gen9 Server - Specifications

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Moderator edit: Updated the link.]

[TVVJ · Accepted solution]

Hello,

When an RAID array is created, the controller takes control of the drives for hardware redundancy. This involves deleting all information in the current state.

Hence, there is no way that I know to successfully create a RAID on existing drives without losing the data on them.

Regards,