HPE Proliant DL380p G10, will not boot from SPP usb

[IdoIT]

Hello everyone

I am currently running in to an odd issue. 

I have 8 Proliant Gen10 Servers, which I need to update the firmware on to the newest version (2018.11.0) using the SPP package. At the moment the servers will not boot from the USB I created for the purpose. The USB is shown in the boot menu, but when I try booting from it, the screen just blinks black and then it return to the boot menu. 

The steps I have taken:

1) Download the 2018.11.0 SPP package from HPE.com

2) Created the bootable USB with the HP usb bootable creation utility. (Stored in the ISO file)

3) Tried booting from the USB, without luck.

To troubleshoot I have done the following: 

- Tried with another SPP (2018.09.0) ISO - Does not work either, same issue.

- Tried with 2 other USB sticks - Does not work either, same issue.

- Tried creating the bootable USB with Rufus - Does not work either, same issue. 

- Checked if the BIOS is setup to allow USB boot, which it already were.

- Tried both UEFI and Legacy boot - Does not work either, same issue with either of them.

I have searched the web and the forums, but I cannot seem to find any other case with this issue. Do anybody have an idea what could be wrong? 

Thanks in advance! 

Regards

A

[Jimmy Vance]

Are you plugging into one of the standard USB ports or the one marked iLO?  You cannot use the iLO service port for booting the SPP

Since others have reported they've had a drive key that just wouldn't work, we can assume that this is possible.  I have tried many differnet USB drive keys over the years, and have not run across one yet that would not work using the HPE USB key utility.  Have you set the system for Legacy mode emulation?

[Torsten. · Accepted solution]

Be aware the maximum USB device size is 32GB.

Just in case.

[tomereynolds]

I will repeat what you said because I wasted a week troublshooting this.   Use 32 GB or smaller...

Larger thumb drives that would boot the G9s no longer work booting the G10s.   

I had to trade my help desk 4 x 128 GB thumb drives for 4 x 16 GB thumb drives to boot my new G10s...

(Also, be sure to not use the usb port labeled Ilo.)

[Torsten.]

32GB is the limitation of the USB creation utility.

[GalenWollenberg]

I have an 8gb flash usb drive, I have tried all the same and cannot get this **bleep** Gen10 to boot and run the SPP update.

can someone provide DUMMY instructions?  I have tried all the regular tricks that have worked for 15 years to boot .isos from a usb key, this thing just does not like it.

The steps I have taken:

1) Download the 2018.11.0 SPP package from HPE.com

2) Created the bootable USB with the HP usb bootable creation utility. (Stored in the ISO file)

3) Tried booting from the USB, without luck.

To troubleshoot I have done the following: 

- Tried with another SPP (2018.09.0) ISO - Does not work either, same issue.

- Tried with 2 other USB sticks - Does not work either, same issue.

- Tried creating the bootable USB with Rufus - Does not work either, same issue. 

- Checked if the BIOS is setup to allow USB boot, which it already were.

- Tried both UEFI and Legacy boot - Does not work either, same issue with either of them.

+ tried YUMI and also YUMI UEFI boot loader.

[Wizzkidy]

Just mount the ISO through the ILO, I have never seen it work any other way on a G10, I know it stupid

[Typhoon87]

I also have this question. Trying to set up 2 G10's right now. I went to use my 8gig USB key with the 2018.11 SPP which I have used to update 5 G8 and 9 devices in the last couple of weeks with no issue, cant get it to boot on the G10. So I rebuilld the USB key with the 2019.03 SPP using the USB key build exe on the SPSS ISO works on the first server, try to get it running on the second server and again its failing.  Both G10''s are brand new fesh out the box no config, no OS nothing but plug them in plug in a keyboard and the usb try to boot to USB not working.

Any other tricks or settings on the device that need to be changed?

[CorbettEnders]

Yup, this was me... using the USB port labelled ILO.  Who knew there was such a thing.  Oops. gotta pay more attention.  Must have wasted 50 minutes on this. 

[dajulez]

It worked for me after changing the boot options to a full discovery scan.

[Flo-T]

Hi,

for me what's work was :

use usb key tool in the SPP .iso

But first mount the iso file on my laptop

and with usb key tool select my dvd drive with the iso mounted instead of the SPP iso file 

[Cyford33]

Its been a while..  i guess i should wait till i finish before posting..   but i believe there may be an executable in the iso  that creates a local partion in the os..   and boots to it..     ill know in a second though