iLO5 Firmware 3.01 bug not fixed yet SNMP ZABBIX issue.

[HPESeven]

Hi, 

The latest version of iLO5 Firmware 3.01 was released on Jan 29, 2024.

Enhancement says:
Addition of new SNMP trap (id# 6146) and Redfish event for runtime Mezzanine card failures on Synergy servers 

As we tried on our server the bug is not fixed yet.

Server Model 1: ProLiant DL325 Gen10 Plus
Controller: HPE Smart Array E208i-a SR Gen10 (Firmware Version: 5.61)
Server Model 2: ProLiant DL325 Gen10 Plus v2
Controller: HPE MR416i-a Gen10+ (Firmware Version: 52.26.3-5250)



snmpget cmd result:
SNMPv2-SMI::enterprises.232.3.2.3.1.1.4.12.239 = No Such Instance currently exists at this OID

before upgrade iLO5 FW from v3.00 to v3.01, it shows below:
SNMPv2-SMI::enterprises.232.3.2.3.1.1.4.12.239 = INTEGER: 1


I have listed the same issue links below which were posted by other users, please kindly help to review the new release version of iLO5  V3.01.


iLO 5 v3.0 firmware does not correctly see disks via SNMP GET, GET-NEXT and WALK

Firmware Bug with SNMP (ILo 5, 3.0.0) , ProLiant DL380 Gen10, HPE Smart Array P408i-a G10

Re: ProLiant Microserver Gen10 Plus Zabbix SNMP issue


BR
Seven

[support_s]

System recommended content:

1. HPE iLO 5 3.01 User Guide | Using iLO with HPE OneView

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[HPESeven]

Hi,  

I'm not seeking alternative solutions; I simply want to bring attention to the fact that the recent iLO5 version 3.01 doesn't address the issue present in version 3.00. I'm confident that I'm not alone in this experience; numerous users of HPE servers are encountering the same challenge. I kindly request assistance in communicating this update and providing feedback to the iLO5 firmware team.

Thanks

Seven

[SydUmar_1]

Hello Seven,
We would request you to log a HPE Support ticket so that the support team could engage the HPE Engineering team. 

[Casper_N]

We also have this issue with Zabbix and SNMP monitoring. 
Stuck on ilo5 2.99 firmware.

[SydUmar_1]

Hello Casper_N,
Could you please update to iLO firmware v3.01 and check if it addresses the issue. If not, request you to log a HPE Support ticket to investigate the issue further. 

[Casper_N]

@SydUmar_1 

Already did. It's not fixed. Same issue.

[HPESeven]

Update:
Per our DL325 Gen10 Plus V2 server, the latest iLO firmware version 3.02 is working as expected.
You have to perform a cold boot and wait for a while after the iLO5 firmware upgrade is complete.