ML 350 g5

[deepakjoshi]

Hi,
One of my serer Ml 350 g5, all the lights of the memory blinks, bip sounds for seven second and there is no display.

[asqwq]

hi
what is confiig of your memory?
please try with minimum memory and say what hapend .
best regards

[deepakjoshi]

i have 10 gb of memory, 2- 1gb and 4- 2gb. when i removed 2- 2gb memory its working.

[.•´¯`•.¸¸. ><((((º>]

Have you checked the mem config guide so you are placing them right?

[asqwq]

plesae sat to me :what is config of your ram for example 1a 3a ,...
please check with 4 2gb.and say what hapend

[asqwq]

hi please try with 4-2gb and say to me?
and what is your config? for example :dimm 1a-3a ,...

[deepakjoshi]

Hi asqwq,
I had the memory configuration of
1A- 1gb
2B- 2gb
3C- 2gb
5A- 1gb
6B- 2gb
7C- 2gb, among that i removed 3C-2gb and
7C-2gb. Its working now.Are those memory are bad? How to confirm? Please help.
Thanks

[asqwq · Accepted solution]

hi
please test with this config:
1a -2gb
5a -2gb
2b- 2gb
6b -2gb
3c- 1gb
7c -1gb
and say to me what happend
if it isnt work , you should use try and error soulotion

[deepakjoshi]

hi,
i placed the memories as you suggested. Its ok and working. But that problem may come again or not.
Thanks for your quick responce.

[asqwq]

hi deepakjoshi
i think you dont have problem with this configuration
best regards

[.•´¯`•.¸¸. ><((((º>]

The problem is solved. It should definately not come back.

/Joakim HP support

[deepakjoshi]

Thanks asqwq and joakim.

[deepakjoshi]

There is same problem on the sever again after some time. It gives bip sound for seven second and lights on the board near the memory slot blinks (1-8). and there is no display.

Thanks Deepak Joshi