Problem replacing raid smart array on ML310

[o-o-o-o]

Hi,

Thank you for assist in advance.

We have HP Server ML310

following the failure of the controller raid card, we replaced it with a P400
But we have the following error messages during startup.
no logical drives found
No int 13 drives to support
No bios installed

+ Knowing that the LEDs of disks does not working + disk off

We understand that the controller card can not detect physical drives
but I can not solve even though I have tried to see many things on the forum.

Thanks

[Torsten.]

What controller was used before?

What generation this server is?

Is the controller cabled correctly?

[o-o-o-o]

Hi,

Thanks for the response

Before wa have the 504023-001 : P400

Now, we installed 504022-001 : P400

Generation 5 (G5)

The cable is correctly, we have changed the câble from another server (same error)

[Torsten.]

If you get the same error with new and old controller, the reason is probably not the controller, right?

How about disk backplane, for example?

[o-o-o-o]

We also assume the same conclusion
but we wanted to be sure

Is there need to test another disk for example