ProLiant DL360 Gen10 can't upgrade firmware for Firmware - Storage Controller

[tho2008]

We user iLO on ProLiant DL360 Gen10, I can upgrade BIOS to ver U32 v2.58 and iLO to ver 2.6.

But I try load firmware https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_fffb22844567457497e8e1d68b , it use for storage controller. I can't upload, always show The file signature is invalid. Make sure you are using a valid, signed flash file and try again.

Please give me .bin file. Let me can download and upgrade. 

Server Platform Services (SPS) Firmware is same problem.

Thanks !

[support_s]

System recommended content:

1. HPE ProLiant DL360 Gen10 Server

If the above information is helpful, then please click on "Thumbs Up/Kudo" icon.

Thank you for being a HPE community member.

[Cali]

Hi,

I don't understand.

You install the .exe Update in Windows and it returns a Checksum Error?
Or by using iLO GUI?
Can you add a Screenshot, how do you do it?
(Use the Camera Symbol here to Insert Photos)

Cali

[SanjeevGoyal]

Hello,

What is the current firmware version.
If the SA controller is running very old firmware, you can not update with the latest firmware .You can skip olny two version.

Or try to update with the latest Service Pack for ProLiant 2021.05.0
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_30e65b7c3541426bb89a6157c6#tab-history

If you feel this was helpful please click the KUDOS! thumb below and accept the solution.
Regards,