HPE Community
ProLiant Servers (ML,DL,SL)
1826107 Members
5181 Online
109690 Solutions
New Discussion

Sbackup - DLT 20/40 connected to Integrated Smart Array

 
Ayman Altounji
Valued Contributor

‎01-28-2001 04:00 PM

‎01-28-2001 04:00 PM

Sbackup - DLT 20/40 connected to Integrated Smart Array

There is a problem when running Sbackup . During the backup process , it is showed the following error message :

1-17-01 5:21:36pm (SBACKUP-4.20a-110) An error occurred during SBACKUP's attempt to write to media: (SMSDI v1.0 334) The transfer Buffers have been recieved out of order from the OS.

What should be the cause of this problem ?

Thank you in advance.
0 Kudos
Reply
2 REPLIES 2
Ayman Altounji
Valued Contributor

‎02-06-2001 04:00 PM

‎02-06-2001 04:00 PM

Re: Sbackup - DLT 20/40 connected to Integrated Smart Array

Sbackup is not supported by the Tape Drive and the Integrated Smart Array .
0 Kudos
Reply
Ayman Altounji
Valued Contributor

‎06-11-2001 04:00 PM

‎06-11-2001 04:00 PM

Re: Sbackup - DLT 20/40 connected to Integrated Smart Array

That's great. Nice to know Compaq have made no attempt to support Netware 4.11. If i'd known that, i wouldn't have bothered purchasing an ML370 with the 20/40 DAT drive. If Compaq had any common sense, shouldn't they at least inform customers that their Drives are not Compatible with netware 4.11's Sbackup?

Very poor indeed...
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.