Smart Storage Administrator doesn't detect array controllers Proliant ML10 gen9 (838124-425)

[Torsten.]

Look at https://www.vmware.com/resources/compatibility/pdf/vi_io_guide.pdf page 227, the adapter is listed there.

I assume the driver comes with the image, at least with the HP image.

You may open the chassis and check if the disks are connected to a PCIe card or the system board.

[rsadangPH]

I'm also having this issues....... working on VMware Esxi 6.0/6.5 on 

HPE ProLiant ML Gen9 servers

I couldn't see further support on Raid concerns... I only see HDD as separate drives.  :(

[citizen_UA]

It doesn't have it. The only way out is server exchange with a surcharge. Good luck!

[Mubasheruddin]

I was also having same issue with HPE DL360 G10 server, i installed below latest SSA utility and it worked.

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_f03fe52db6774fc88847c1131a