Unable to boot into ACU HP DL360e Gen8 server

[Man_Of_The_Hour]

I have been trying to load into the ACU to set up some new drive for my Vsphere install. but after i reflashed the ILO4 and restored it to full functionality, but i have still unable to boot into it. the only thing that gets displayed on the screen is :

SYSLINUX 4.04 EDD 0x529e77a0 Copyright (C) 1994-2011 H. Peter Anvin et al                                                             hp_has_autoboot = 1mapping found, adding default= to cmdline                                                                                     cmdline = gfxboot.c32 bootlogo gfxmessage gfxmenu.cfg default=acu

This will stay this way until i turn it off as i have left this for several hours whitout a change in status. request additional guidance for futher troubleshooting.

[Sebasbin]

Hi,

Please download the offline ACU from the below link and Follow the installation instruction

https://support.hpe.com/connect/s/softwaredetails?language=en_US&softwareId=MTX_3c888073127c4c65b7bd8559eb&tab=Compatibility

This ISO image you can be mounted as a CD image through ILO virtual media and boot from the image.

This image is a bootable environment that immediately starts ACU to allow configuration of storage