ProLiant Servers (ML,DL,SL)
1823914 Members
3268 Online
109667 Solutions
New Discussion

Re: Unable to configure the Redfish

 
Diego_Silva
Occasional Contributor

Unable to configure the Redfish

Hello Team,

 

How are you?

Team, i have a hardware ProLiant DL380 G10 and i'm receiving the following error when i add it in the Oneview.

"Unable to configure the Redfish event subscription on the management processor, which is required by the appliance for server management.

Base.1.17.EventSubscriptionLimitExceeded."

 

Had anyone faced this issue before?

If yes, how will you fix it?

I tried the steps to refresh the server, reboot the server and nothing.

5 REPLIES 5
thutchings
HPE Pro

Re: Unable to configure the Redfish

Hello,

 

It is possible that some software in your environment may have created redfish subscriptions that may be resulting in this behavior. Worse case scenario for this problem will likely require a factory reset of the iLO to resolve. A factory reset of the iLO will wipe out all configuration settings, so this should be done with care. You can always reconfigure the iLO, but the default iLO password will need to be obtained from the pull tab on the front of the server.

 

Another option is to manually delete one or more subscriptions. You can issue the following from a rest/redfish client:

GET https://<iLO IP address>/redfish/v1/EventService/Subscriptions

You should be able to see your subscriptions on the iLO, then if you spot 1 or more that are no longer valid then you can just issue the following:

DELETE https://<iLO IP address>/redfish/v1/EventService/Subscriptions/<subscription ID number>

 

Regards



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
MV3
HPE Pro

Re: Unable to configure the Redfish

To address the above issue, I would suggest you to first check if you are able to ping the Host iLO from OneView.

Cheers...



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
diegosims
Occasional Visitor

Re: Unable to configure the Redfish

It worked here.

 

Thank you so much!

Vijay241
Occasional Contributor

Re: Unable to configure the Redfish

Hello ,

Could you please help us the complete setps how to fix teh issue for unable to confiure the Redfish subscrption 

Regards

Vijay 

Sunitha_Mod
Moderator

Re: Unable to configure the Redfish

Hello @Vijay241,

Thank you for posting. 

You might want to consider creating a new topic by utilizing the "New Discussion" button if you are facing any issues, as this will not only enhance visibility compared to the old topic but also boost your chances of receiving responses from experts.



Thanks,
Sunitha G
I'm an HPE employee.
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo