HPE Community
ProLiant Servers - Netservers
1822520 Members
2535 Online
109642 Solutions
New Discussion

How-To Configure Hot Plug (hot spare) hard-drive...

 
SOLVED
Go to solution
frank sachse
New Member

‎10-03-2006 01:36 PM

‎10-03-2006 01:36 PM

How-To Configure Hot Plug (hot spare) hard-drive...

I just acquired a spare hard-drive (Ultra 320 SCSI 36.4GB 10K) with caddy/tray to use as a hot spare (plug) for my existing ML370g4 4 drive RAID-5 config. Because I don't have any documentation I am not sure what I have to do to insert my new drive into the array & to configure it so the system sees it as a hot spare. My O/S is Windows Server 2003. Any help would be appreciated. Many thanks!
0 Kudos
Reply
1 REPLY 1
sandeep_raman
Honored Contributor

‎10-03-2006 02:55 PM

‎10-03-2006 02:55 PM

Solution

Re: How-To Configure Hot Plug (hot spare) hard-drive...

Hello frank,

Select the array to which you want to add this disk.
Select the task 'Spare Mgmt' and then the new disk,you are done.
Now it should read as Array with Spare.

SRH
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.