SmartStarting Scripting toolkit & DL580: STATEMGR issue?

[Ian Banyard]

I've got a DL580 that wont retain STATEMGR variables from the SS Toolkit 1.7 or 1.8. I've upgraded the latest ROMs, ran erase etc all to no effect.

[Ian Banyard]

Did some more digging, the first time statemgr runs, it wont pick up the value, the second time it will. Anyone else seen this? DL360 and DL380's both work fine!!

[kevin dunn_1]

I'm having a similar problem on a DL380 G3. I run 'statemgr.exe /w phase 2' then reboot the box. When I try to read the state after reboot it returns 0. Any ideas?

[Charles Nusbaum]

I'm also experiencing a similar issue. I've determined that, on a 380 G3, STATEMGR settings don't hold after an ERASE. Settings hold through a reboot and even a cold reboot, but not when ERASE is part of the equation.


Is there a switch on erase that leaves STATEMGR settings alone?


Kevin: Did you get your issue solved? I'd be curious to know if not using your PCI sniffer allowed the STATEMGR settings to keep hold.