Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: DL360 Gen10 IPMI UID sensor (reading_type 0x70 / type 0xc0) values

 
Highlighted
Occasional Contributor

DL360 Gen10 IPMI UID sensor (reading_type 0x70 / type 0xc0) values

Hi.,

For Gen8 and Gen9 servers, the following document describes the possible values for the UID and Sys Health LED sensors: https://support.hpe.com/hpesc/public/docDisplay?docId=mmr_kc-0109788

What is the bitmap offset/possible values for the UID sensor on Gen10 servers? They seem to use the same reading type and and sensor type of previous versions, but the values (bitmap) seems to have changed?

Thanks,

Felipe.  

1 REPLY 1
HPE Pro

Re: DL360 Gen10 IPMI UID sensor (reading_type 0x70 / type 0xc0) values

Hi,

 

Please refer to the below link, hope this helps

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00026902en_us


I am a HPE Employee

Accept or Kudo