HP SIM 5 server status show not correct

[Karol Litecky_2]

After upgrade HP SIM 4.2 SP2 to HP SIM 5 some servers are not correct show status in event list. HP SIM not "paired" server and his ILO.

[Aravindh Rajaram]

For the association problem, run the identification task once. And for the wrong status problem, just go through the edit feature of the tasks named "Hardware status polling for servers" and "Hardware status polling for non-servers". Do not change any of the values but just go through all the sections of edit and just save it.

[Karol Litecky_2]

I have try it, but this not resolved my problem. I've still "not paired" some servers a his ILO cards. You can show on attached picture.

[Don Reese_3]

Run the 'Identify' task on BOTH the system and the management processor - that will associate the iLO with the server.

Also, make sure the SNMP security has localhost in the allowed hosts section, in addition to the CMS.