manual discovery of HPUX system

[Rick Garland]

Hi all:

Got System Insight Manager 4.2 SP1 on a W2K box as the CMS.

I am trying to add an itanium ia64 rp4640 HPUX 11.23 system. I have setup the WBEM with a user (using the root), I have configured the SNMP and restarted. When I go to the Manual Discovery page in SIM I input either the sys name or the IP. Does some thinking and then returns without adding the system. There is a red star next to the NAME/IP ADDRESS field indicating that this is a required field. I am putting in the name or IP. What is it looking for?

[Haridas]

May be it has added the system. PLease check All systems list to see if the system that you added is there..

It's just not giving you a confirmation that it has added the device successfully ;)..

[Rick Garland]

Have checked for all systems, by system type, by system OS, etc. The result is the same, "No entries currently meet the criteria"

Is it missing something else?

[Rick Garland]

Found it. Needed to give my username access to view the systems.

Thanbks

[Rick Garland]

User access needed to be configured.