RIB/RILOE not showing as "in Server"

[Dan Robinson_4]

Some of my RIB/RILOE/iLOs are linking themselves to their servers, and some arent.

Does anyone have a checklist of some sort to figure out why some arent auto linking properly?

I dont suppose there is a manual way of linking the two either, is there?

[Brian Kleeman]

I am experiencing the same problem. I have reinstalled all agents and upgraded all RIB/RILOE. Any one have any other suggestions?

[David Claypool]

Make sure that the "SNMP/Insight Manager" setting is set to 'high.' hpSIM/IM7 uses this to make the association. One of the elements of the response is the server serial number which is matched to the GUID/Index of the server in the database. If the two don't match, no association.

A common occurence is having a MB replacement and not programming a serial number in the new board.

[Brian Kleeman]

Where is that setting? Is it on the servers that are being monitored or the SIM server.

Thanks.

Brian

[David Claypool]

It's under the 'Administration' tab in the iLO UI.

[Magoo]

...for the iLo thats true. What about the RILOEs? Do the they also have a comparable setting?

Thanks