Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Systems not showing warranty or contract info

 
Highlighted
New Member

Systems not showing warranty or contract info

Anyone have any tips for managing systems in SIM not showing warranty or contract info? I've got an issue where a large percentage of systems in Remedy don't show warranty or contract info. So in troubleshooting I see the same thing in HP SIM. Further troubleshooting reveals that a lot of these systems are missing agents. So I have requests in place to reisntall the latest PSP. My question is whether this is enough and if there's another solution that addresses this.

Any responses apprecitated.
2 REPLIES 2
Highlighted
Honored Contributor

Re: Systems not showing warranty or contract info

HPSIM needs to be able to get the serial number and part number in order to verify the contract details. There are options in HPSIM to manually populate these.
You can then run the CW process.
You don't need the agents for this, it's also the way you can add switches etc. where you cannot install agents.
SNMP is sometimes enough to get the data.
Highlighted
Advisor

Re: Systems not showing warranty or contract info

I am also having the same issue. My SIM server has open access to the Internet with a web proxy server that requires no authentication. I have put in the proxy config info using the "configureProxy -H" and have made sure that the servers have the serial no, product no, and location set. I'm still getting the same error as the original poster is getting. Any ideas? Is there any way to test to make sure that HP's stuff is available?