Where can i get most current BIOS for HPE ProLiant ML350 Gen9?

[dev_intro]

Hi there

Can't see anything here: https://support.hpe.com/connect/s/search#t=DriversandSoftware&sort=relevancy&layout=table&numberOfResults=25&f:@kmtargetproductl1l5namelist=[Servers,HPE%20ProLiant%20ML350%20Gen9%20Server]

Thank you very much for your feedbacks. 

[dev_intro]

IS that one the most current?
-> https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_2e97fbb3c6eb4b17ba09623f1c

Thank you for your feedbacks... 

[TVVJ]

Hello,

You may search for the respective product in HPE Support Center and then select the model. Then select tab 'Drivers and Software'. Next, select 'BIOS' from the buttons listed in that tab. Click here to reach the tab directly.

Regards,

[dev_intro]

Thank you for your feedback. I think my link ist the most current one.

I can't get it without a contract - my somebody knows an alternative source for downloading?

[support_s]

System recommended content:

1. HPE ProLiant ML350 Generation9 (Gen9)

2. HPE ProLiant ML350 Gen9 Server Maintenance and Service Guide

If the above information is helpful, then please click on "Thumbs Up/Kudo" icon.

Thank you for being a HPE community member.

[dev_intro]

That nice, BUT: Proxmox runs without any problems on every $ 300 desktop or laptop, but not on a > $ 10000 hp enterprise server.

Isn't that's strange, someway...??

[dev_intro]

now i will try it with linux-image-5.14.0-0.bpo.2-amd64 from bullseye-backports...!!

[Ihaqueit]

Its a free version.

Software Details - * RECOMMENDED * System ROM Flash Binary - HPE ProLiant ML350 Gen9 (P92) Servers | HPE Support

If you need current latest version to download contact to HPE or renew contract.

Better downlad only from HPE sites, suggestion to not dowmload from any another resources chances to damage your server.

[dev_intro]

Thanks.

[dev_intro]

Is that the latest free BIOS update for Ml360 Gen.9? Thank you for your feeback. 

[Ihaqueit]

Is it ML 360?

[dev_intro]

Yes, HP ProLiant ML360 Gen. 9... 

[Ihaqueit]

Please contact to HPE support.

[dev_intro]

Warranty is over, because of that my question about the latest free version... 

[Torsten. · Accepted solution]

There is no ML360, ML350 only.

Latest BIOS ML350 Gen9:

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_2e97fbb3c6eb4b17ba09623f1c#tab-history

You need a contract for download.

Latest free version:

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_da978df55bbb44258ed7b19012

[Ihaqueit]

If ML350,

Software Details - ** CRITICAL ** Online ROM Flash Component for Windows x64 - HPE ProLiant ML350 Gen9 (P92) Servers | HPE Support

[dev_intro]

THank you very much - but how can i boot into the embedded shell without to be in UEFI mode?

-> https://www.google.com/search?q=hp+server+boot+embedded+shell&rlz=1C1LRNT_deCH946CH946&oq=hp+server+boot+embedded+shell&aqs=chrome..69i57.5019j0j7&sourceid=chrome&ie=UTF-8

-> https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_da978df55bbb44258ed7b19012

Thank you very much for your feedbacks.

[dev_intro]

"To update Firmware from System Utilities:
1.       Copy the binary file to a USB media or iLO virtual media.
2.       Attach the media to the server.
3.       In POST, press F9 to enter System Utilities and select Embedded Applications.
4.       Select “Firmware Update” and then “System ROM”.
5.       Choose “Select Firmware File”, and then select the device and the flash file.   
6.       Select “Start Firmware Update” and allow running to completion."


There is NO USB device...!!

[dev_intro]

I only see "[GPT] Embedded RAID : Smart Array 440ar Controller" - nothing with USB...

[dev_intro]

Maybe the problem is the USB 3.0 boot stick?

[dev_intro]

"1.       Copy the binary file to a USB media or iLO virtual media.
2.       Attach the media to the server.
3.       Boot to Embebded Shell.
4.       Type Map –r to get the assigned file system volume for the USB key.
5.       Change to the current directory to the one with the binary file using the CD command.
6.       Run “fwupdate –d BIOS -f <filename>.flash” to flash the ROM.  You can press the TAB key to complete the file name."

Lists me a lot of entries, more than a screen, and the "Pause" key does not work to make pause to see them all... 

[dev_intro]

Is there a way to install that firmware on Proxmox 7.x (=Debian 11.x) ???

[dev_intro]

Now i tried it with a USB HDD... same thing... 

[dev_intro]

Problem persists also after a soft reboot - USB HDD is still not visible.

-> The device is not in EFI mode. only in legacy. Is that the reason for that behavior??

[dev_intro]

Here - full proof...