Switching and Routing
1752328 Members
5310 Online
108786 Solutions
New Discussion

Re: Ntp unsynchronized

 
Gladis
New Member

Ntp unsynchronized

Ntp unsynchronized

#display ntp-service status
Clock status: unsynchronized
Clock stratum: 16
Reference clock ID: none
Nominal frequency: 100.0000 Hz
Actual frequency: 100.0000 Hz
Clock precision: 2^18
Clock offset: 0.0000 ms
Root delay: 0.00 ms
Root dispersion: 0.00 ms
Peer dispersion: 0.00 ms
Reference time: 00:00:00.000 UTC Jan 1 1900(00000000.00000000)

2 REPLIES 2
parnassus
Honored Contributor

Re: Ntp unsynchronized

Should we start guessing your Switch model or are you so kind to provide us few more details about it and its configuration with regard to its NTP setup (As Known As: help us help you...)?


I'm not an HPE Employee
Kudos and Accepted Solution banner
ITLIMA
Occasional Visitor

Re: Ntp unsynchronized

These are commands that I use:

---------------------------------------------------------------------------------------------------------

timesync sntp
sntp unicast
sntp 30
sntp server priority 1  192.168.1.250
timesync sntp
time timezone -300

---------------------------------------------------------------------------------------------------------


My Server NTP is 192.168.1.250
I am in Lima, Peru GMT -5  (time timezone -300)