HPE Community
Web and Unmanaged
1851012 Members
2619 Online
104056 Solutions
New Discussion

Re: hp 1910 port speed management no responding

 
SOLVED
Go to solution
raip15
Occasional Advisor

‎03-25-2013 08:37 AM - last edited on ‎05-28-2013 11:15 PM by

‎03-25-2013 08:37 AM - last edited on ‎05-28-2013 11:15 PM by

hp 1910 port speed management no responding

hi,

 

I received my first hp 1910 switch. Very poor settings with CLI but very rich web management.

 

 

I upgraded system with last stable image 5.20 1513P06.

I configured vlan, mstp, and igmp snooping. But impossible to configure port speed. System not responding during 5 minutes (no ping and web) and config is not applied.

 

Is there problem with port management on this switch ?

 

 

P.S. This thread has been moved from Switching > Comware-Based to Web and Unmanaged - Hp Forum Moderator

 

 

0 Kudos
1 REPLY 1
raip15
Occasional Advisor

‎03-26-2013 02:46 AM

‎03-26-2013 02:46 AM

Solution

Re: hp 1910 port speed management no responding

Problem resolved with upgrade to 5.20.R1513P13.

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.