Posted to: ProLiant Servers (ML,DL,SL)
05-02-2024 Hello,We have a problem with loud fans on 2 new ML350 Gen11 servers.The servers are up to date.The fans are constantly running at over 21%.We installed an ML350 gen11 last year and the fans are running at 11%. This is not up to date.So it must be a d... Posted to: Servers - General
04-26-2024 Hello i just recently bought and installed a proliant ml110 gen11 server and everything went fine. But when i tried setting up my first raid(RAID1 between 2 ssd's) i got this error:500 - ("status"-"fail" "message""Internal Server Error" "data" "bytes... Posted to: ProLiant Servers (ML,DL,SL)
Thursday I have a DL360 G7 and it has the P410i array controller. I have three HPE SAS 300GB hard drives installed and I'm trying to create a RAID 5 array. When I go to the controller I can see all three drives, but my only RAID option is a RAID 0+1. I've reb... Posted to: ProLiant Servers (ML,DL,SL)
Friday I see iLO5 v3.07 has been released:https://support.hpe.com/connect/s/softwaredetails?language=en_US&collectionId=MTX-2dc80c4ae4b943fa&tab=Fixes But in stead of including the details about Enhancements and Fixes, as HPE used to, the download page just... Posted to: StoreEver Tape Storage
Wednesday Dear all,I still have a performance issue with a newly purchased Ultrium LTO-8. When I write files to tape, I can't go faster than 115-120MB/s. This unit, however, has a declared speed of about 300MB/s.Now I will describe the environment in which I c... Posted to: ProLiant Servers (ML,DL,SL)
07-09-2024 Hello guys, our machine Proliant DL360 Gen10 has a ILO5 version. 3.04 has a Network configured as a Shared LOM.It is setting IPv4 and IPv6 access via the web and remote console as well.After upgrading the firmware to version 3.05, access via the IP...
Posted to: Servers - General
Monday Hello everyone.I am a computer scientist, I have had a problem for some time with an HPE dl300 gen 9 server: the server crashes after several hours of operation and each time, I have to restart it to get it working again.Thank you in advance for your... Posted to: Other HPE Product Questions
Thursday Hello, We have a strange issue in HP 1910-8G-POE which is Trunked to HYPER-V server, in which we have 4 vlans192..168.20.0 (VLAN20) VLAN INTERFACE 192.168.20.1192.168.40.0 (VLAN40) VLAN INTERFACE 192.168.40.1192.168.60.0 (VLAN60) VLAN INT... Posted to: Operating System - HP-UX
Tuesday I have a PA-RISC system running HP-UX 11i v1, installed from 2006-12 media , and an AD385A PCIX 10G NIC installed into a PCIX 64-bit 133-MHz slot. (The card is specified to work in 64-bit 266/133/66 MHz slots.) I've installed 10GigEthr-00 (ixgee driv... Posted to: StoreEver Tape Storage
Monday My HP Ultrium 3000 external tape drive is not being detected by the computer at all. I've tried everything I could find with regard to installing drivers, checking compatibility, etc, but to no avail.Symptoms:* The tape drive powers up correctly, and...
