Posted to: StoreEver Tape Storage
2 weeks ago Good day all, We recently installed a brand new drive into the Library. When trying to cleant the drive it comes back with the error : "Data cartridge was used for cleaning drive'. This is not true as I am using the same cartridge to clean the other ...
Posted to: ProLiant Servers (ML,DL,SL)
Thursday Hello everyone,I'm encountering an issue after rebooting an ESXi host. Upon restart, some VMs are showing as connected to an "Unknown" network. This wasn't an issue before the reboot. I'm trying to restore the correct network settings for these VMs. ...
Posted to: HPE Nimble Storage Solution Specialists
10 hours ago Hello,NIMBLE SNMP mib contains information about volume size and usage. Volume size isn't problem. It is here:.1.3.6.1.4.1.37447.1.2.1.4.0 = Gauge32: 5242880 -- first volume 5TB.1.3.6.1.4.1.37447.1.2.1.4.1 = Gauge32: 512000 -- second volume 500GBBut... Posted to: BladeSystem - General
a week ago Hi, all. I have 2 uplink, 1 for 1 bay, and now it in active\stand-by mode. Wonna switch to LACP. Can anyone tell, how long vc switch to it, what time my blades will without network connectivity? Posted to: ProLiant Servers (ML,DL,SL)
05-22-2012 How do i add an iso to virtual media?ILO 4, ML350 Gen8 can the Scripted Media URL be local or is it an internet location? Posted to: ProLiant Servers (ML,DL,SL)
6 hours ago hello all, asking if i can still update ILO4 and BIOS in my server ProLiant ML310e Gen8 v2
Posted to: HPE Storage Networking - Switches
7 hours ago Lost password.. How to reset to the factory default? Is there a reset button? Where is the reset button located at? Thanks I have figured it out how to reset the password Posted to: ProLiant Servers (ML,DL,SL)
8 hours ago Customer needs to expand from standard 8 drives to more. Assuming we would need the proper drive cage (765756-001), as well as the cables (876491-001 and 876496-001), however, we do not know if they will need an additional RAID card as well, and if s... Posted to: Operating System - HP-UX
Tuesday I have a PA-RISC system running HP-UX 11i v1, installed from 2006-12 media , and an AD385A PCIX 10G NIC installed into a PCIX 64-bit 133-MHz slot. (The card is specified to work in 64-bit 266/133/66 MHz slots.) I've installed 10GigEthr-00 (ixgee driv... Posted to: HPE SimpliVity
Thursday Has anyone seen this. We deployed 2 new hosts and one of the hosts when trying to shutdown Virtual controller from SimpliVity Action we get an error "Unexpected server error." but we can safely shutdown the OVC through CLI.I also notice that the icon...
