WX3024 -- Ethernet Interface issue

[DanielRobles]

Hi all,

For some reason I can only see interface gigabitethernet 1/0/1 on the wireless module, unable to change to other interfaces as gigabitethernet 1/0/2.

Using version 520 3111p2

Any hint on this

Best regards,

Daniel

[alexpina]

<device> oap connect slot 0
<device_LSW>
to access the slot switch to view the corresponding interfaces

[DanielRobles]

Thanks,

I know that but have not been able to find the option to make the thernet interfaces visible in the wireless switch mode.

I Can see them in the OAP module

Thanks,

Daniel

[ISoliman]

The switch Mode of the AC is accessible only by the OAP you cannot merge both the AC and the SW into 1 mode this is the default and correct behavior, it is like 2 devices in 1 chassis each has it's own management interface.