HPE Community
Disk
1832963 Members
2744 Online
110048 Solutions
New Discussion

Re: Adding Disk

 
Matt Anderson_1
New Member

‎09-11-2003 08:34 AM

‎09-11-2003 08:34 AM

Adding Disk

I have a Proliant DL380 w/StorageWorks 4454R enclosure attached. I have 4 disk slots that I want to fill, but I want to know if adding these extends the existing Raid-5 Windows partitions or I will have to create new ones With the added disks?
0 Kudos
1 REPLY 1
Leif Halvarsson_2
Honored Contributor

‎09-11-2003 11:17 AM

‎09-11-2003 11:17 AM

Re: Adding Disk

Hi,
4454R is a JBOD rack (just a bunch of disks). It depends on the RAID controller you use if it is possible to extend an existing RAID set or if the new disks must be confirured as a new set. Of course it is always possible to reconfigure the whole array but in this case you must restore the data after reconfiguration.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.