3PAR StoreServ Switchover back to original 3PAR

[asteins]

Hello, we had a case where with the help of HPE Support 3 of our 5 Remote Copy groups where switched over (using Switchover from Actions tab in SSMC of the Remote Copy Groups) from 3Par_A to 3Par_B. So basically now all volumes are being presented to hosts from 3Par_B.

Both of the 3Par's have paths to all hosts. All of the remote copy groups in question are started and synced.

What would be the correct procedure to switch the volumes back to the original 3Par_A? Can we just do switchover again or is there a procedure we need to follow after the initial switchover?

Thanks

[AnilKT · Accepted solution]

Hi asteins,
You can follow the same switchover procedure.
I would recommend you do this during non-business hours.

Hope this helps.!

Regards

Anil

[asteins]

Great, thanks, that is what we tought, just wanted to confirm.

[Sunitha_Mod]

Hello @asteins,

Perfect! 

We are glad to know your concern has been addressed.