How obtain serial number in Brocade Switch by command?

[Fernando Boza]

I have Brocade 4Gb SAN Switch for HP p-Class BladeSystem. Fabric OS: v5.0.0

I need to obtain serial number by command.
I try with "chassisshow" but, this show the factory serial number (11 characters), I need 12 character serial number.

Pls, help me.....

[Uwe Zessin]

Fernando,
most of the time I get values from the "ssn" and "bsn" commands.

[SAKET_5]

Yep, "ssn" (Switch Serial Number)works for me.

[Fernando Boza]

Those commands no fwork i Fabric OS: 5.00

[MitVongNam]

Not 100% sure but I think

chassisshow.

Regards;

[MitVongNam]

Last line of the attachment shows value of SN# 13 chars.
Regards;

[Mark Poeschl_2]

There is also an "ssn:" entry in the output of 'configshow'.

[Fernando Boza]

"chassisshow" show the factory serial number (11 or 13 characters), I need 12 character serial number (HP Serial Number).

[MitVongNam · Accepted solution]

Very interesting!!! I saw the 12 digits SN you talked about. But I was able to retrieve it via GUI not CLI. By the way, it is referenced as Supplier Serial #.I am very much interested to see How to get it via CLI.
Regards;

[Darin Lory]

Check out the last line of the chassisshow command, that is your HP Serial Number:

CHASSIS/WWN Unit: 1
Header Version: 2
Factory Part Num:
Factory Serial Num: -
Manufacture: 
Update: Day: 
Time Alive: 
Time Awake: 
ID: BRD0000CA
Part Num: 
Serial Num: -

If you are licensing your Powerpack, you will need the switch WWN. You can get that with the switchshow command.

-Darin