HPE Community
HPE EVA Storage
1833038 Members
2331 Online
110049 Solutions
New Discussion

Problem with MSA1000

 
Png Kah Keong
Occasional Contributor

‎03-29-2006 02:40 AM

‎03-29-2006 02:40 AM

Problem with MSA1000

I'm running MSA100 attached to a blade enclosure - BL20P

I removed one of the logical disk in a bl20p which was from the MSA1000 and now I can't see any logical disks from the MSA1000 after the reboot.

Tons of errors in the event log. Anyone encountered this before?

A failure due to grouping might have been encouneterd. A Mutually exclusive fault between paths to the host might prevent the luns from being able move to the correct controller. This problem can be fixed by restoring the paths which are broken.
0 Kudos
1 REPLY 1
Png Kah Keong
Occasional Contributor

‎03-29-2006 04:26 PM

‎03-29-2006 04:26 PM

Re: Problem with MSA1000

The problem is with the host adapter in the blade server. It shows offline in the HP Management homepage. Enabled the secondary adapter and the server can see the logical drives in the SAN now.

This looks like a hardware failure.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.