routing primary and secondary ip in hp layer switch from cisco router

[rene1]

I have this attached network I want to configure, this is my first configuration, I am hoping if I can get some help. My major problem is to configure this id and make them communicate and access the internet through an ISP DSL modem. The modem IP 192.168.0.1, and my router learn using IP address DHCP at fa0/0, my internal network core switch is connected to router fa0/1, with IP address 10.192.112.1/24 and  10.196.113.1/24 secondary.

The hp core switch has VLAN 112 with the IP address 10.196.112.40, VLAN 113 10.196.113.40. I have some devices connected to VLAN 113 and some to VLAN 112.

I want them to be able to communicate and get internet, as there are some servers with IP 10.196.113.135/24, gw 10.196.113.40, DNS 10.192.112.18,  and other servers in 10.196.112.130/24, gw 10.196.112.40, DNS 10.192.112.18.

I have attached a diagram here   https://www.dropbox.com/s/4zhlb5mtq3ux01m/cccc.png?dl=0

[maguanglongMike]

Hi there,

can you provide the device system version and running config?

yours

[gc_09]

Hi There,

Have you been able to perform the configuration and facing issues with comunication between configured networks ?

Or you are looking for help with the very configuration itself ?