MSA Storage
1833289 Members
3104 Online
110051 Solutions
New Discussion

Re: Replace both P2000 G3 MSA Systems Controllers at the same time

 
SOLVED
Go to solution
sferreiro
Senior Member

Replace both P2000 G3 MSA Systems Controllers at the same time

Hello everyone,

I have a doubte about a P2000 with one controller in fail status.

I have to replace controller in fail, but additionally I would like to replace working controller too because it's too old and it's very probable that fails too.

So my doubt is, can I shutdown the whole P2000, replace both controllers and power up the systems without lost of information or data corruption?

Thanks in advance

5 REPLIES 5
support_s
System Recommended

Query: Replace both P2000 G3 MSA Systems Controllers at the same time

System recommended content:

1. HPE P2000 G3 MSA Array Systems -Troubleshooting

2. HP P2000 G3 MSA System CLI Reference Guide

 

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

 

Thank you for being a HPE valuable community member.


Accept or Kudo

JonPaul
HPE Pro
Solution

Re: Replace both P2000 G3 MSA Systems Controllers at the same time

@sferreiro 
Yes you can swap or upgrade the controllers without losing the data on the disk sets.  This would be similar to upgrading the P2000 to MSA 1040/2040.  The upgrade guide is no longer available from HPE as the P2000 is End Of Support Life.

Here is an alternate location for the upgrade paper:  https://manualzz.com/doc/24235692/upgrading-to-the-hpe-msa-1040-or-hpe-msa-2040-2042-technical   or you may want to Google for the Upgrade guide.  This will give you an idea of what to expect.
# sales pitch #
You should really be looking to update your storage to something newer/supported.  As you have pointed out the system is suspect due to age.

Did you know the MSA Health Check works on P2000 as well?   www.hpe.com/storage/MSAHealthCheck



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
Cali
Honored Contributor

Re: Replace both P2000 G3 MSA Systems Controllers at the same time

Yes you can swap or upgrade the controllers without losing the data on the disk sets. 

That's correct for the Data (Raid, Volumes), but let me give the note, that the Configuration of the MSA is stored on the Controllers.

If you swap both at the same time, this is lost.

It includes things like iscsi or FibreChannel configuration, Volume exports, added Hosts, Name, Time, Mail Setup, ...

It's a good idea to take some Screenshots, so you can recreate them.

Cali

ACP IT Solutions AGI'm not an HPE employee, so I can be wrong.
sferreiro
Senior Member

Re: Replace both P2000 G3 MSA Systems Controllers at the same time

So, the fact that one of the controllers is in fail state, when y replace de controller that si working property, the configuration will be lost,. Is this true?

Thanks

Cali
Honored Contributor

Re: Replace both P2000 G3 MSA Systems Controllers at the same time

Yes, the Data will Stay, but the Controller config is lost.

Because only the Raid and Volume Configuration is stored on the Disk.

But if you have captured by CLI or Screenshots, I will typically recreate it within 15-30 min.

Cali

ACP IT Solutions AGI'm not an HPE employee, so I can be wrong.