2 node mcsg cluster cmquery can't find cmclconfig file ?

[Sammy_2]

Trying to configure 2 node sg cluster with sgrac extension for the first time.
1) Why is cmquerycl looking for cmclconfig file ?
I don't have one.(see below)
2)what does unable to determine domain name
3)Do I have to pvcreate disk before I run this cmquery command ? is that why I get "unable to pen disk" message.
#cmquerycl -C escripttest.ascii -n ojrdhes3 -n ojrdhes4

Jul 5 15:04:20 ojrdhes3 cmclconfd[4201]: Unable to stat /etc/cmcluster/cmclconfig, No such file or directory
Warning: Unable to determine local domain name for ojrdhes3
Jul 5 15:04:20 ojrdhes3 cmclconfd[4202]: Unable to open disk /dev/dsk/c0t0d0: No such device
Jul 5 15:04:20 ojrdhes3 cmclconfd[4202]: Unable to stat /etc/cmcluster/cmclconfig, No such file or directory
Jul 5 15:04:22 ojrdhes3 cmclconfd[4205]: Unable to open disk /dev/dsk/c8t3d0: No such device
Jul 5 15:04:22 ojrdhes3 cmclconfd[4205]: Unable to open disk /dev/dsk/c8t4d0: No such devic

[Sammy_2]

Additional info:

# ==> swlist |grep -i service
B3935DA A.11.16.00 Serviceguard
B7609BA A.04.00.02 Event Monitoring Service
B8325BA A.04.02 Serviceguard Manager
B8339BA B.03.00.09.02 servicecontrol manager Server and Agent Bundle

[Mel Burslan]

do you have an /etc/cmcluster directory ?

did you pvcreate the cluster aware disks and make them "cluster aware" ?

the domain name is just a warning telling you the servernames can not be associated with a domain. Most probably in your /etc/resolv.conf, you do not register the servers with a domain name.

[Sammy_2]

Can I make the disks cluster aware before I run cmquerycl command ?

[Sammy_2]

I have a /etc/cmcluster directory

[Devender Khatana · Accepted solution]

Hi,

Find attached cluster config guide.

HTH,
Devender

[vinod_25]

hi sammy

hope u haven't ran cmquerycl with these options

cmquerycl -v -C /etc/cmcluster/filename -n node1 -n node2

have you run cmscancl -o ?

see the url : mc sg configuration guide... follow it...

http://64.233.179.104/search?q=cache:ATYRxglnZE0J:www.phptr.com/content/images/0131463969/samplechapter/0131463969_ch25.pdf+cmquerycl+cmclconfig&hl=en
Good Luck

Vinod

[Pradeep_3]

Do you have cmclnodelist file on your two nodes.containing the two node names and root.

prasad

[Sammy_2]

Devender and Vinod,- Both of your attach. are very helpful. It has examples and that helps. I am following those and so far it has been working for me. Thanks
Pradeep- I have the cmclnodelist although I am not sure if A11.16 version, you even need cmclnodelist.
Mel- You are right. I did not pvcreate or configure any shared disk. Neither did I do vgexport and vg
import. Now, I dont get any error.
Dev. and Vinod guided me to follow steps. I will post any more problems I may have.