HPE Community
Operating System - HP-UX
1833780 Members
2448 Online
110063 Solutions
New Discussion

Re: after system reboot some VGs are taking up to 30 minutes to activate

 
moonchild
Regular Advisor

‎04-20-2007 08:45 AM

‎04-20-2007 08:45 AM

after system reboot some VGs are taking up to 30 minutes to activate

RP8420 11.11 after installing patch PHKL_34193 and rebooted the system some VGs are taking up to 30 minutes to activate. all the disks are part of enclosures: EMC and IBM in a SAN env.

no errors in syslog no LVM errors when activating itès only hanging.

Thanks
0 Kudos
Reply
1 REPLY 1
Rasheed Tamton
Honored Contributor

‎04-20-2007 06:33 PM

‎04-20-2007 06:33 PM

Re: after system reboot some VGs are taking up to 30 minutes to activate

Contact your SAN guys (EMC/IBM) for help

Are you using alternate links for the disks.
If so, may be, you have to remove the alternate links from volume groups on the SAN (EMC) disks, as alternate links should be managed by powerpath.

Use hardware diagnostic tool to see more errors (STM).

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.