HPE C7000 / HPE Apollo A6000 - Needed screws for the rails?

[HostSlick]

Hi,

I own multiple HPE C7000 and HPE APollo A6000 which are currently installed in Racks.

We are going to move them to a other datacenter in 2 week.

Im currently unsure but which screw-sets are needed to install the Rails in the Racks?
Is it the normal M6 OK? Or we use M4x20 , M4x25?
Or are there any special screws.

i can not look to verify... as said they are currently in their old racks and i wish to purchase the correct screws etc before we move datacenter.

thanks in advance

[TVVJ]

Hello,

The HPE BladeSystem c7000 Enclosure and the HPE Apollo a6000 Chassis have Rackmounting kit (spare part number 432461-001) and HPE Apollo a6000 Chassis Rail kit (spare part number 747036-001) respectively.

Please review the hyperlinks provided above and see if they are of any assistance.

You may also refer to the HPE Apollo a6000 Chassis Maintenance and Service Guide and HPE BladeSystem c7000 Enclosure Maintenance and Service Guide for more information. There does not appear to be a separate set of screws for these enclosures though.

Regards,