Inteligent Provisioning not starting

[enocsoto]

I recently bought an HP Proliant DL380p Gen8 and reset default factory settings. I only changet date and time on the configuration and restarted. Then I went to Inteligent Provisioning F10 and it does not start, It just tries, makes a short beep and a black screen apears with an underscore for a second and then reboots for an infinite loop. Is there anything else I am missing? thanks for the help.

[support_s]

System recommended content:

1. HP OneView 1.05 User Guide

2. HP ProLiant DL580 G3 Server - Troubleshooting

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Suman_1978 · Accepted solution]

Hi,

What if you dont press F10, does the server continue to boot?
Please refer to the following post and some documents for help.

In some cases, the IP may have to be reimaged.

Thank You!
I work with HPE but opinions expressed here are mine.
HPE Tech Tips videos on How To and Troubleshooting topics

[enocsoto]

I did check the manual and I had to burn an old school dvd so it can start and everything went good so far, thanks.

[Sunitha_Mod]

Hello @enocsoto,

Perfect! 

We are extremely glad to know the problem has been resolved.