BL460c ILO2 problem after firmware (ROM flash) upgrade to 1.70

[Torbjorn Mohn]

It seems to me that HP has NOT addressed this problem at all? What does it take for them to do so? I'm sticking to ver 1.8 for now. I'm not even going to try the new version 1.11.0

[Steven Jordan]

I have the same problem. I am going to disable the ASR so it will not bring the server down.

[Jim Dunne]

I also see this, but on 32 bit Windows 2003. Server is a DL585 G2. I went back to Sys Mgmt Driver 1.8 (from PSP 8.15) and we will see if it stops the Event Log message. I have had two ASR reboots but it is not yet fully proven they were related to this driver.

[Dmitry Dolgov]

I have two blade(bl460c) with same problem, one 32bit Windows 2003, another 64bit. 1.8 and 1.11 management driver does not solve this problem. I had to disable the ASR.

[Torbjorn Mohn]

1.8 did not solve my problem until after a cold reboot of the blade! It's been working now without any problems since I went back to 1.8!

[James Kennedy_4]

HP just sent out an advisory on this problem the other day:

http://alerts.hp.com/r?2.1.3KT.2ZR.%5fKSjA.D7gIwE..N.H8f0.1qcU.bW89MQ%5f%5fCVfWFNX0

They say to upgrade to 1.11 in the article. I haven't tried it yet, but based on those who have tried it here already, doesn't appear to fix the issue. Staying at 1.8 for now I guess.

[Gunnar Andersson]

I have a NLB-cluster with 2 BL460c running 64bits w2003 and have the same problem i've tried 1.8, 1.9 and 1.11 and the problem still exist. Now i'm trying cold reboot and hopefully the problem is solved for the moment.

[Gunnar Andersson]

No ASR after cold boot on my two servers 17/4. Event 57 hpqilo2 still coming up on one of the servers although the 2 servers have identical firmware & drivers.

[Robert_Walton]

I am running Win2k8 Std 64bit on a BL465c G5. I to am having the same issues with ASR's and the attempts as all the others above have been done with no resolution.

Just a question but everyone who are getting these ASR, are you running SIM (Insight Manager) Version 5.3 (with hotfix)?

[GORDITO]

Just a question but everyone who are getting these ASR, are you running SIM (Insight Manager) Version 5.3 (with hotfix)?

YES we are and I've applied the new version and my BL685c are still rebooting.