Server Management - Systems Insight Manager
1837655 Members
2921 Online
110117 Solutions
New Discussion

Re: HP Systems Insight Manager

 
Jeff Doe
Advisor

HP Systems Insight Manager

Here is my problem/scenario

I have about given up on the Systems Insight Manager but it continues to bother me that I cannot get it to work properly.

I have 2 servers setup in a test environment.
Server A= Managed Server with Insight Manager software
Server B= The one server I am trying to monitor

I am having problems getting the Insight Manager email settings to notify me when a critcal device fails.

I have tried to modify the the email settings by putting in our Exchange 2000 ip address and also the FQDN. (Also made sure I entered in the IP address of the HP Insight Manager server into our Exchange server to allow relay)

I setup 2 different "automatic event handling"
1. Unacessible device with the following settings, domain/adminaccount, where "severity" "is" "critical", and where "system name" "is" "any".
Entered in my text message email address and also my regular domain email address. I do not get any notifications? Please help, jdoe@faegre.com
4 REPLIES 4
David Claypool
Honored Contributor

Re: HP Systems Insight Manager

You didn't mention whether or not you configured an SMTP server to handle the email...

Options --> Events --> Automatic Event Handling --> Email settings
Jeff Doe
Advisor

Re: HP Systems Insight Manager

Actually that was one of the first options I configured after installing IM.
Pat Wilson
Valued Contributor

Re: HP Systems Insight Manager

Is your Exchange server set up to accept internal SMTP traffic? By that I mean, is the Internet Mail Connector installed and configured to accept mail from your HPSim server?

Also, you said you used your "regular domain email address" - by that you mean "jdoe@faegre.com" or your Exchange alias?
Jeff Doe
Advisor

Re: HP Systems Insight Manager

We have 4 different exchange servers and what I ended up doing was pointing it to another exchange server and also accepting relaying in MS Exchange from the SIM server.

One thing I am noticing and have been advised that the event notification is very flaky, when you modify an existing event such as adding an email address, etc the event will not work. The work around was is to recreate the event. I am told that a service pack is due in a couple of weeks?