Posted to: HPE OneView
2 hours ago Hi, Hoping someone can confirm my thoughts regarding an update of OneView from 6.60.07 -> 7.0 I have logged a case for the customer but so far no response (well over a week) from HPE support. I logged the case against some valid HPE server hard... Posted to: Server Management - Remote Server Management
Sunday It is not clear to me from the documents whether it is possible to upgrade the firmware on an MR controller via ilorest. Francois Donzé says basically that ilorest can upload more payloads than it can actually process. I unzipped the fwpkg file and... Posted to: ProLiant Servers (ML,DL,SL)
2 weeks ago Hi,I have an issue where my ILO keeps losing connection randomely, After troubleshooting with HPE the problem came from my enterprise security scanner.HPE told me the limitation is around 200, more and glitches and disconnection will occur, when that... Posted to: Servers - General
an hour ago Hello,I have installed on Windows Server 2022 :HP LaserJet Pro 300/400 color M375/M475 Series Full Software and Driversthe scanner software doesn't install, I can't use it.Thanks Posted to: ProLiant Servers (ML,DL,SL)
a week ago We have a few VMs and two drive arrays on a DL380 Gen10 server. After a recent firmware and OS update (ESXi customized 7.0.3 from HP) the fan speeds have doubled and now run at 29-49%, which is obnoxiously loud. Nothing about the environment or the... Posted to: ProLiant Servers (ML,DL,SL)
a week ago Greetings,we run a ML 110 Gen 10 with an 4210 CPU, 6x16GB Ram, aP408i-p Smart Array Controller with 5 SAS 900GB 12G HDDs, Sitting in one Bay, 1-4 in Raid 10, 8 as Standby Spare.Softwarewise we now run Esxi in 7.0.3 VMware ESXi 7.0.3 Build-21930508 Up... Posted to: ProLiant Servers (ML,DL,SL)
Tuesday hello i have 2 proliant DL380 gen 10 with 2 processor and fully loaded with 32GB HPE smart memory ram ( 24 stick of ram ) the ram is P00924-b21HPE P00924-B21 32GB 2Rx4 PC4-2933Y-R CL21 ECC Reg RDIMM Smart Memory first the servers has 12 stick and hpe...
Posted to: HPE 3PAR StoreServ Storage
10-16-2017 Hi,I do the checkhealth in my 3par system. But always get the alert as below：Port port:0:0:2 Port listed as host path but is State:ready, Mode:initiator and Type:rcfcPort port:1:0:2 Port listed as host path but is State:ready, Mode:initiator and Type... Posted to: HPE Primera Storage
4 hours ago Hello,We need to rename several virtual volumes in our HPE Primera system. However, these virtual volumes are members of a Remote Copy group. The documentation states, "It is not possible to rename a virtual volume that is already associated with a R... Posted to: ProLiant Servers (ML,DL,SL)
Wednesday Anyone know why the current SPP: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/#/index.aspx?version=gen11.2024.04.00.00Does not run on ProLiant Microserver Gen10 Plus v2 and ProLiant ML350 Gen 11? I get a root prompt ...
