Posted to: HPE Morpheus Enterprise
an hour ago Hello, we are looking at implementing a single Morpheus node. But there is a possibility we hit the 10000 workload limit.In which case: can we, reasonably, upgrade the single node architecture to a multi-node ? Will this require a long downtime of th... Posted to: HPE Morpheus VM Essentials
2 hours ago Does this HPE Morpheus kvm hypervisor support pure storage on a fiber SAN?https://hpevm-docs.morpheusdata.com/en/latest/vme_getting_started/vme_getting_started.html#id15shows that HPE Alletra and MSA are supported and Netapp and Dell. Posted to: HPE Synergy
2 weeks ago We discovered that one of our ILO's had a static ip assigned that belonged to another device. When setting a new ip for the ILO, it was mis-entered and now the ILO is offline. I can't figure out a way to access it to correct the ip. Posted to: ProLiant Servers (ML,DL,SL)
Wednesday HiWe are using ACE for iLO5 and iLO6, I saw this feature is no longer supported for iLO7 ???Are there any plans to re-introduce this feature again ?Unsupported features in HPE iLO 7 1.14.00Automatic Certificate Enrollment method of HPE iLO SSL Certif... Posted to: ProLiant Servers (ML,DL,SL)
Wednesday Hi,Our Server DL380 GEn 10 has beed shutdown by iyself due to overheat :Environment System Overheating (Temperature Sensor 4, Location Memory, Temperature 127)After we restarted the server, we did not find any HW issue,.My question is : IS it fake ... Posted to: Servers - General
Wednesday BIOS/Hardware Health on HPE ProLiant DL380 Gen8 Server (Health Status: Critical)For the past few days, the server health status has been shown as "Critical (Failed)" in the ILO interface, specifically under the BIOS/Hardware Health subsystem.Here are... Posted to: MSA Storage
Wednesday Hello!I`m using P2000 G3 FC storage.I have 7 vdisk and want to remove one of them (named "dgA01", 4-disk RAID5)I receive error: "Unable to delete the vdisk(s).The delete operation failed because the vdisk is being used as a pool component."dgA01 has ... Posted to: NonStop Servers
5 hours ago We currently use HPE FlexFabric 5930 switches in an IRF stack (ToR-A in Rack A, ToR-B in Rack B) connected to a 6-node Nutanix cluster running ESXi. Each node is dual-uplinked (one link to each ToR), with uplinks to a core switch (L3 gateway).We are ... Posted to: ProLiant Servers (ML,DL,SL)
5 hours ago Hi to all, I need an help to correctly understand the status of a Raid 1 on a server of new customer. (ProLiant DL380 Gen9 with Smart Array P440ar)When I have made the first access on this server I had the Raid 1 in the photo (link below) with disk ...
Posted to: ProLiant Servers (ML,DL,SL)
6 hours ago Hello,we have this log below:"At least one of the links is up in adapter HPE Eth 10Gb 2p 537SFP+ Adptr in slot 2"Can You kindly tell us if the "2p" refers to the second port? What is the meaning of "2p"?Thank You and kind regards
