Posted to: HPE Ezmeral Software platform
yesterday I am trying to setup HPE- Ezmeral data fabric 7.3 in ON-Prem and AWS cloud with 8 nodes but its stuck at 72% . logs says waiting for CLDB to come online. 2024-08-19 21:40:15.774: Wait for CLDB(s) to come online(wait_for_cldb.sh { "MAPR_HOME": "{... Posted to: ProLiant Servers (ML,DL,SL)
25m ago Hello, what is wrong with this DL380 server?We noticed yellow Drive LED.We did reboot, but the ILO drive view error persists. Posted to: ProLiant Servers (ML,DL,SL)
Thursday I'm trying to update the BIOS of a DL360 Gen 10 + that has a TPM chip.I'm ussing SCCM to do the hard work, however it doesn't install silently as there is the warning as the installer has found a TPM chip.Is there a undocumented switch to install the... Posted to: Your questions about the HPE Support Center website
yesterday Hi How can i change my account name You Sh is not my name My name is SeungHo YouMy First name is SeungHo and last name is YouThanks Posted to: ProLiant Servers (ML,DL,SL)
Thursday I have a DL360 G7 and it has the P410i array controller. I have three HPE SAS 300GB hard drives installed and I'm trying to create a RAID 5 array. When I go to the controller I can see all three drives, but my only RAID option is a RAID 0+1. I've reb... Posted to: ProLiant Servers (ML,DL,SL)
10-19-2018 Hello,I'm using Zabbix 4 LTS with its standart template for HPE iLO for server monitoring. Every sensors reading working well, but after some time (about 10-12 hours after reset) iLO stops to respond. This problem appears on several ProLiant DL560 Ge... Posted to: HPE Nimble Storage Solution Specialists
Thursday Good dayI am looking for some guidance on the storage configuration for a Alletra 4140 Storage Server.The unit has 2 x HPE SR932i-p Gen11 storage controllers and each controller has 17 x 20TB SAS disks and 2 x 7.68TB SSD disks.I assume the SSD disks ... Posted to: ProLiant Servers (ML,DL,SL)
Friday Hi Team,Below error are displaying from AHS logs in Proliant Bl460c GE blade server:1. 71: POST Error: 226-Power Fault Detected-Embedded Storage Controller. Action: Re-seat storage controller if removable. Otherwise, contact HPE service.2. ... Posted to: ProLiant Servers (ML,DL,SL)
Friday Hello community, I have issue with HPE MR216i, it detects only one NVME disc, I have two supported NVME discs, but controller sees only one, both diods are green on controller from the back. Posted to: Servers - General
Thursday hello, I have a 3-disks Raid 5 array, when I try to expand the array by the 4th disk, it crashes with the error "FATAL firmware error: Line 188 in fw/raid/utils.ccontroller restart every 5sec.firmware on MR408i-o - 52.26.3-54874th disk is sam as othe...
