Posted to: MSA Storage
yesterday Dear Jon from HPEthanks for you very good support, i also will using the MSA-DP+ on our new MSA Storage. We have 18 x SSD drives and im thinking about to running 18 x SSDs with MSA DP+ on 1 Pool. (Only Drive 1)Or 12 drives MSA DP Pool A + and 6 dri... Posted to: ProLiant Servers (ML,DL,SL)
Tuesday Getting an occasional PSOD from this server and ony thing that is non HPE is some bifurication enabled PCI Cards in it, does everything on the PSOD expertes here see point to these cards? first cardSyba Quad M.2 NVMe Ports to PCIe 3.0 x16 Interface... Posted to: ProLiant Servers (ML,DL,SL)
Wednesday Hi,today we've encountered a heavy issue with following combination:DL360 Gen11iLo6 v1.60vSphere 8 U2When we manually trigger an iLo Reset, we get a PSOD on the Server, while running. This is reproduceable anytime with iLo Version v1.60.When we downg... Posted to: HPE SimpliVity
12-18-2023 Hello, good morningI am a bit confused about the simplivity zones.Is it necessary that the cluster is Stretched or is it possible to configure zones without the Stretched configuration?Currently I have a client with 4 nodes and has zones configuratio...
Posted to: ProLiant Servers (ML,DL,SL)
4 hours ago On a DL360 Gen11 with a "HPE MR408i-o Gen11" RAID controller, we have a RAID-5 setup with 3 disks. We want to add a forth disk to this array so that we can expand disk space. I have been trying to use the MR Storage Administrator utility (Windows S...
Posted to: HPE OneView
Monday I recently spun up a new DL380 Gen 10 server with the Gen10 SP for ProLiant 2024.04.00. I initially utilized the Profile option of "Firmware Only" to upgrade the FW. That went fine.Once I applied my Win2k22 server image on it and upgraded AMS to vers... Posted to: BladeSystem - General
5 hours ago not really rare - just not that much demand in the second hand market because they're expensive to run (hello kilowatts of 240v/3phase power) and hard on the ears.If you wanted to turn a profit, stripping the ram and CPUs from the modules and sending... Posted to: Servers - General
12-07-2020 HelloI hope this is not a stupid question since I am new to this formum and ILO in general but I am getting these errors (a lot of them) and it does not give me much informaiton as to what it is or where to look to fix it. I am hoping the experts ... Posted to: Insight Remote Support
yesterday Hello, does anyone have some information about how to configure call home for the SN3420M Switch on IRS?From this document https://support.hpe.com/hpesc/public/docDisplay?docId=a50007023enw&docLocale=en_USSN3420M is not supported on IRS, it will be s... Posted to: HPE OneView
05-09-2024 Since we upgraded to OneView 8.9 we see "host status is unknow" when trying to check the image compliance. The odd thing is everything seems to be communicating as far as iSUT is concerned. We can't seem to find anyting broken that is not allowing th...
